[Dnsmasq-discuss] DHCP on 1 interface, two IP ranges

[John Gorkos]

On Friday 27 April 2007 15:16:04 Simon Kelley wrote:
> Your config looks fine. I don't know why it's not working. Please could
> you supply version numbers for dnsmasq (dnsmasq -v), your kernel (uname
> -a) and, if possible, the output of "ip addr show"
>
> Cheers,
>
> Simon.

With pleasure.

BusyBox v1.00 (2005.08.23-20:55+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

-  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 WHITE RUSSIAN (RC3) -------------------------------
  * 2 oz Vodka   Mix the Vodka and Kahlua together
  * 1 oz Kahlua  over ice, then float the cream or
  * 1/2oz cream  milk on the top.
 ---------------------------------------------------
root at dt:~# dnsmasq -v
Dnsmasq version 2.22  Copyright (C) 2000-2005 Simon Kelley

This software comes with ABSOLUTELY NO WARRANTY.
Dnsmasq is free software, and you are welcome to redistribute it
under the terms of the GNU General Public License, version 2.

root at dt:~# uname -a
Linux dt 2.4.30 #2 Fri Sep 9 16:06:01 CDT 2005 mips unknown
root at dt:~# ip add show
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:0f:66:e4:ee:b0 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 00:0f:66:e4:ee:b2 brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc htb
    link/ether 00:0f:66:e4:ee:b0 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.1/24 brd 10.0.0.255 scope global br0
    inet 192.168.10.2/24 brd 192.168.10.255 scope global br0:radio
    inet 192.168.6.2/24 brd 192.168.6.255 scope global br0:control
5: vlan0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc noqueue
    link/ether 00:0f:66:e4:ee:b0 brd ff:ff:ff:ff:ff:ff
6: vlan1: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc htb
    link/ether 00:0f:66:e4:ee:b0 brd ff:ff:ff:ff:ff:ff
    inet 70.246.240.181/29 brd 70.246.240.183 scope global vlan1
7: teql0: <NOARP> mtu 1500 qdisc noop qlen 100
    link/void