[Dnsmasq-discuss] VLANs and incorrect pools?

[Chris Moates]

I'm struggling to figure out what I'm doing wrong in my configuration.
I've got three VLANs on two interfaces:

eth1.10
eth1.11
eth0.12

I'm running dnsmasq 2.55 and my dnsmasq.conf has the following:

interface=eth1.10
interface=eth1.11
interface=eth0.12
dhcp-range=interface:eth1.10,10.8.16.220,10.8.16.240,12h
dhcp-range=interface:eth1.11,10.8.1.200,10.8.1.225,12h
dhcp-range=intreface:eth0.12,10.8.2.200,10.8.2.225,12h

Interfaces are configured as such:

eth1.10 inet addr:10.8.16.6  Bcast:10.8.16.255  Mask:255.255.255.0
eth1.11 inet addr:10.8.1.1  Bcast:10.8.1.255  Mask:255.255.255.0
eth0.12 inet addr:10.8.2.1  Bcast:10.8.2.255  Mask:255.255.255.0

I have a client in VLAN 10 which when requested, gets an IP from VLAN 11:

2011-02-07T23:53:21.972965-05:00 kudzu dnsmasq-dhcp[14806]: 870443910
available DHCP range: 10.8.1.200 -- 10.8.1.225
2011-02-07T23:53:21.973001-05:00 kudzu dnsmasq-dhcp[14806]: 870443910
available DHCP range: 10.8.16.220 -- 10.8.16.240
2011-02-07T23:53:21.973016-05:00 kudzu dnsmasq-dhcp[14806]: 870443910
available DHCP range: 10.8.2.200 -- 10.8.2.225
2011-02-07T23:53:21.973028-05:00 kudzu dnsmasq-dhcp[14806]: 870443910
DHCPDISCOVER(eth1.10) c0:cb:38:5c:ea:17
2011-02-07T23:53:21.973040-05:00 kudzu dnsmasq-dhcp[14806]: 870443910
DHCPOFFER(eth1.10) 10.8.1.211 c0:cb:38:5c:ea:17

Clearly dnsmasq logs that it came in on the proper VLAN, but it hands
out the wrong address. What am I missing?

Cheers,
Chris