<div dir="ltr">Hello Albert,<br><br>Thank you very much for the help!<br><br><br>-> Er... Same subnet on both interfaces?<br>Ok I understand, this is not very elegant... My idea was, that this way no need to configure routing.<br><br>New static IP of the MINB-box eth0: 128.66.12.15<br>IP NT4: 128.66.12.6<br><br><br><br>-> Try to ping the NT4 machine from the Mint machine after having disabled the USB interface on it<br>Yes it works:-)<br><br>mint@mint ~ $ ping 128.66.12.6<br>PING 128.66.12.6 (128.66.12.6) 56(84) bytes of data.<br>64 bytes from <a href="http://128.66.12.6">128.66.12.6</a>: icmp_seq=1 ttl=128 time=0.398 ms<br>64 bytes from <a href="http://128.66.12.6">128.66.12.6</a>: icmp_seq=2 ttl=128 time=0.239 ms<br>64 bytes from <a href="http://128.66.12.6">128.66.12.6</a>: icmp_seq=3 ttl=128 time=0.394 ms<br><br><br>-----------------------------------------------------------------------------------------------------<br><br>Even i did not expect it to work, pinging it's own USB-interface from the MINT-machine does work,<br>even usb0 is in an other subnet :-) <br><br>mint@mint ~ $ ifconfig<br><br>usb0      Link encap:Ethernet  HWaddr 02:xx:xx:xx:xx:xx <br>          inet addr:192.168.42.20  Bcast:192.168.42.255  Mask:255.255.255.0<br><br><br>mint@mint ~ $ ping 192.168.42.20<br>PING 192.168.42.20 (192.168.42.20) 56(84) bytes of data.<br>64 bytes from <a href="http://192.168.42.20">192.168.42.20</a>: icmp_seq=1 ttl=64 time=0.031 ms<br>64 bytes from <a href="http://192.168.42.20">192.168.42.20</a>: icmp_seq=2 ttl=64 time=0.026 ms<br><br><br><br><br>What do you suggest to do next, in order to get the NT4 machine a dynamic IP from DNSmasq/MINT?<br><br><br>Thank you very much for every feedback!<br><br>Bill<br><br><br><br>PS:<br>Pinging the MINT USB-interface 192.168.42.20(DNSmask not started) from the NT-machine 128.66.12.6<br>is not yet possible (host not reachable).<br><br></div>