[Dnsmasq-discuss] Help me please! Multiple IPs on one interface - not working

[Simon Kelley]

Sorin Panca wrote:
> Hello! I'm sorry about the delay.
> Another test:
> I did this:
> 
> A. rm /etc/hosts
> 
> B. zefir sorin # cat /etc/dnsmasq.conf
> domain-needed
> bogus-priv
> no-resolv
> filterwin2k
> resolv-file=/etc/resolver
> strict-order
> address=/no.net/127.0.0.1
> interface=eth1
> interface=eth2
> no-dhcp-interface=eth0
> bind-interfaces
> dhcp-authoritative
> dhcp-range=lan1,192.168.1.10,192.168.1.14,255.255.255.248,2m
> dhcp-range=lan2,192.168.1.18,192.168.1.22,255.255.255.248,2m
> dhcp-option=lan1,3,192.168.1.9
> dhcp-option=lan2,3,192.168.1.17
> dhcp-option=42,0.0.0.0
> dhcp-leasefile=/var/lib/misc/dnsmasq.leases
> log-queries
> dhcp-host=00:02:a5:68:07:fa,192.168.1.22
> 
> C. zefir sorin # ip addr show
> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
>     inet6 ::1/128 scope host
>        valid_lft forever preferred_lft forever
> 2: teql0: <NOARP> mtu 1500 qdisc noop qlen 100
>     link/void
> 3: tunl0: <NOARP> mtu 1480 qdisc noop
>     link/ipip 0.0.0.0 brd 0.0.0.0
> 4: gre0: <NOARP> mtu 1476 qdisc noop
>     link/gre 0.0.0.0 brd 0.0.0.0
> 5: sit0: <NOARP> mtu 1480 qdisc noop
>     link/sit 0.0.0.0 brd 0.0.0.0
> 6: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
>     link/ether 00:90:27:be:b8:a3 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.0.2/29 brd 192.168.0.255 scope global eth0
>     inet6 fe80::290:27ff:febe:b8a3/64 scope link
>        valid_lft forever preferred_lft forever
> 7: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
>     link/ether 00:90:27:89:81:c2 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.1.17/29 brd 192.168.1.255 scope global eth1
>     inet 192.168.1.9/29 brd 192.168.1.15 scope global eth1
>     inet6 fe80::290:27ff:fe89:81c2/64 scope link
>        valid_lft forever preferred_lft forever
> 8: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
> qlen 1000
>     link/ether 00:08:c7:08:9d:6c brd ff:ff:ff:ff:ff:ff
>     inet 192.168.1.25/29 brd 192.168.1.255 scope global eth2
>     inet6 fe80::208:c7ff:fe08:9d6c/64 scope link
>        valid_lft forever preferred_lft forever
> 
> D. zefir sorin # /etc/init.d/dnsmasq stop
>  * Stopping service dnsmasq
>  * Stopped service dnsmasq
> 
> E. zefir sorin # rm /var/lib/misc/dnsmasq.leases
> 
> F. zefir sorin # /etc/init.d/dnsmasq start
>  * Starting service dnsmasq
>  * Service dnsmasq started OK
> 
> G.
> Nov 17 18:40:11 [dnsmasq] exiting on receipt of SIGTERM
> Nov 17 18:40:34 [dnsmasq] started, version 2.23 cachesize 150
> Nov 17 18:40:34 [dnsmasq] compile time options: IPv6 GNU-getopt
> ISC-leasefile no-DBus
> Nov 17 18:40:34 [dnsmasq] DHCP, IP range 192.168.1.18 -- 192.168.1.22,
> lease time 2m
> Nov 17 18:40:34 [dnsmasq] DHCP, IP range 192.168.1.10 -- 192.168.1.14,
> lease time 2m
> Nov 17 18:40:34 [dnsmasq] failed to load names from /etc/hosts: No such
> file or directory
> 
> H. Starting the client machine (on slax-5.0.5)
> Nov 17 18:42:53 [kernel] e100: eth1: e100_watchdog: link down
> Nov 17 18:42:55 [kernel] e100: eth1: e100_watchdog: link up, 100Mbps,
> full-duplex
> Nov 17 18:44:42 [dnsmasq] DHCPDISCOVER(eth1) 00:02:a5:68:07:fa
> Nov 17 18:44:42 [dnsmasq] DHCPOFFER(eth1) 192.168.1.14 00:02:a5:68:07:fa
> Nov 17 18:44:42 [dnsmasq] DHCPREQUEST(eth1) 192.168.1.14 00:02:a5:68:07:fa
> Nov 17 18:44:42 [dnsmasq] DHCPACK(eth1) 192.168.1.14 00:02:a5:68:07:fa
> 
> Not good. It should be 192.168.1.22 .

Not good.

I think I found the problem, by staring at the code 'till drops of blood 
formed on my forehead :-)

I'll send you some fixed code not CC'd to the list.


> 
> P.S. What does HTH mean? :)

Hope That Helps


Cheers,

Simon.

> 
> Cheers,
> 
> Sorin.
> 
> _______________________________________________
> Dnsmasq-discuss mailing list
> Dnsmasq-discuss at lists.thekelleys.org.uk
> http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss
>