[Dnsmasq-discuss] Re: Problem with multihomed interface
Marcus Better
marcus at better.se
Thu Apr 27 08:14:07 BST 2006
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
again I have problems with DHCP on interfaces with multiple IP addresses.
The system is a Linksys WRT54GS router running OpenWRT with dnsmasq 2.30
(also tried 2.26).
The interface vlan1 is configured with two IP addresses:
root at wrt:~# ip addr show dev vlan1
8: vlan1: <BROADCAST,MULTICAST,ALLMULTI,UP> mtu 1500 qdisc htb
link/ether 00:13:d4:24:f7:35 brd ff:ff:ff:ff:ff:ff
inet aa.bb.cc.dd/17 brd aa.bb.255.255 scope global vlan1
inet 192.168.102.1/24 scope global vlan1
tcpdump shows me the incoming requests from my DHCP client, but there is no
response:
root at wrt:~# tcpdump -n -i vlan1 port bootps or port bootpc
09:03:47.631154 IP 192.168.100.3.bootpc > 255.255.255.255.bootps:
BOOTP/DHCP, Request from 00:40:8c:10:63:ab, length: 300
Note that this DHCP client (a print server) mistakenly thinks that it is
192.168.100.3, an old setting which it stores in nvram. Could this be a
problem?
dnsmasq.conf has the lines:
dhcp-range=wan,192.168.102.32,192.168.102.254
dhcp-host=00:40:8c:10:63:ab,axis,192.168.102.4
The second line is supposed to match this DHCP client.
Thanks,
Marcus
- ------------8<dnsmasq.conf-------------------------------------------
domain-needed
no-resolv
domain=home.better.se
server=81.216.65.11
server=81.216.65.12
dhcp-leasefile=/tmp/dhcp.leases
dhcp-authoritative
dhcp-range=lan,192.168.100.32,192.168.100.127
dhcp-range=wan,192.168.102.32,192.168.102.254
dhcp-host=00:40:8c:10:63:ab,axis,192.168.102.4
- --------------------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
iD8DBQFEUG9EXjXn6TzcAQkRApMEAKDP8Un6id1TjoBEeDHhyPa7H6gKkwCfRsQh
+8m+TID4rmiD7TS//FfoNSk=
=SXEa
-----END PGP SIGNATURE-----
More information about the Dnsmasq-discuss
mailing list