[Dnsmasq-discuss] no address range available for DHCP request via wlan0

[richardvoigt at gmail.com]

Is wlan0 a member of a bridge?  Is an IP address configured on wlan0?

On Wed, Apr 1, 2009 at 12:38 AM, Brent S. Elmer, Ph.D. <webe3vt at aim.com>wrote:

> I am trying to use dnsmasq to assign DHCP addresses for a wireless
> access point.  I keep getting the message above when it is trying to
> give out an address.  My computer that is running dnsmasq is connected
> to the internet via wired ethernet on eth0 to a DSL modem and gets an
> address via DHCP.  I have a wireless card on wlan0 that is set up to be
> an access point.  Obviously I am doing something wrong.  Any help would
> be appreciated.
>
> The DHCP settings on the DSL router are:
> Begginning IP address: 192.168.1.64
> Ending IP address: 192.168.1.254
> Subnet Mask: 255.255.255.0
>
> The dnsmasq.conf settings are:
> filterwin2k
> domain=theElmers.org
> local=/localnet/
> interface=wlan0
> dhcp-range=192.168.0.50,192.168.0.150,255.255.255.0,12h
>
> Thanks,
> Brent
>
>
>
>
> _______________________________________________
> Dnsmasq-discuss mailing list
> Dnsmasq-discuss at lists.thekelleys.org.uk
> http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.thekelleys.org.uk/pipermail/dnsmasq-discuss/attachments/20090401/39a5ebe8/attachment.htm