[Dnsmasq-discuss] IP address based on switch port number (option 82)

[Ignacio.Bravo at belden.com]

Simon Kelley <simon at thekelleys.org.uk> wrote on 15/02/2010 22:19:21:

> Maybe not. Please could you split the test up: use a dhcp-range without
> tags, so that an address is always allocated, set log-dhcp, and check
> which tags are set. (Look in syslog, the set of tags is printed there.)
> That will help to isolate the problem.

First of all sorry for my previous htmls

I did your test and found: When:
dhcp-range=10.10.35.2,10.10.35.5,255.255.255.0
dhcp-remoteid=switch1,00:06:00:80:63:60:e1:64
dhcp-circuitid=puerto3,b9:06:00:00:01:01:01:03

I get: 
dnsmasq: etiquetas: puerto3, eth0 (only last tag configured is set)

And when:
dhcp-range=10.10.35.2,10.10.35.5,255.255.255.0
dhcp-circuitid=puerto3,b9:06:00:00:01:01:01:03
dhcp-remoteid=switch1,00:06:00:80:63:60:e1:64

I get:
dnsmasq: etiquetas: switch1, eth0 (only last tag configured is set)

Best
Ignacio


DISCLAIMER:

Privileged and/or Confidential information may be contained in this
message. If you are not the addressee of this message, you may not
copy, use or deliver this message to anyone. In such event, you
should destroy the message and kindly notify the sender by reply
e-mail. It is understood that opinions or conclusions that do not
relate to the official business of the company are neither given
nor endorsed by the company.

Thank You.