[Dnsmasq-discuss] Announce: dnsmasq-2.67rc1

[Simon Kelley]

On 02/10/13 10:24, Vladislav Grishenko wrote:
> Hi Simon,
>
>>               Remove the rule for constructed DHCP ranges that the local
>>               address must be either the first or last address in the
>>               range. This was originally to avoid SLAAC addresses, but
>>               we now explicitly autoconfig and privacy addresses
>>    	    instead.
>
> There's minor cosmetic issue after above changes.
> Dnsmasq logs first address for SLAAC/DHCP stateless templates on startup,
> what makes sense only for DHCPv6 stateful.
>
> Example:
> 	br0  inet6 addr: 2001:db8::1/64 Scope:Global
> 	dhcp-range=lan,::2,::255,constructor:br0,ra-names,64,86400
>
> 	dnsmasq-dhcp: DHCPv6, IP range ::2 -- ::255, lease time 1d, template
> for br0
> 	dnsmasq-dhcp: DHCPv4-derived IPv6 names on ::2, template for br0
> 	dnsmasq-dhcp: router advertisement on ::2, template for br0
> 	dnsmasq-dhcp: DHCPv6, IP range 2001:db8::2 -- 2001:db8::255, lease
> time 1d, constructed for br0
> 	dnsmasq-dhcp: DHCPv4-derived IPv6 names on 2001:db8::, constructed
> for br0
> 	dnsmasq-dhcp: router advertisement on 2001:db8::, constructed for
> br0
> 	dnsmasq-dhcp: IPv6 router advertisement enabled
>
> Addr "::2" shown above in DHCPv4-derived IPv6 names and router advertisement
> is redundant, because not further used.
> Actually, non-DHCPv6 stateful templates use only prefix part of the first
> address in configured range, in example above "::2/64" =>  "::".
>
> Best Regards, Vladislav Grishenko
>
>
>

Thanks, simple fix pushed.


Cheers,

Simon.