[Dnsmasq-discuss] dnsmasq's AdvRouterAddr On equivalent

[Jorge Schrauwen]

Hey All, 

I had a bit of trouble getting ra to work on OpenBSD but manually compiling 2.69 seems to have done the trick. (Yay!) 
I was porting over my old radvd.conf from linux and I have this option set "AdvRouterAddr On". I cannot seem to find the equalivant in dnsmasq. 

I want me router's global address 2001:DEAD:BEEF:DDDD::1 to be advertised as the default route and not the link-local. 
This breaks some firewall bits that I sadly don't have control over. I could always go back to a dnsmasq+radvd setup but I want to retire the linux server that currently runs radvd. 

Some pointers appreciated! 

Regards 


Jorge 


Below is my current configuration (anonimized): 
##### dnsmasq configuration 
### listen on interface 
interface=vlan150 
interface=vlan200 
interface=vlan300 

### dns 
## hosts (import /etc/hosts) 
#no-hosts 
#addn-hosts=/etc/dnsmasq.d/hosts 
## custom resolvers 
resolv-file=/etc/dnsmasq.d/resolvers 
## domain configuration 
domain=example.org 
domain-needed 
expand-hosts 
bogus-priv 

### dhcp 
## options 
dhcp-authoritative 
dhcp-option=option:netbios-nodetype,8 
dhcp-option=option6:dns-server,[::] 
dhcp-option-force=option:ntp-server,172.16.db.1 
dhcp-option-force=option6:ntp-server,[2001:DEAD:BEEF:AAAA::1] 

## static leases 
dhcp-hostsfile=/etc/dnsmasq.d/reservations 

## ipv4 
dhcp-range=vlan150,172.16.db.100,172.16.db.225,24h 
dhcp-range=vlan200,172.16.db.220,172.16.db.225,48h 
dhcp-range=vlan300,172.16.db.200,172.16.db.225,48h 

## ipv6 
enable-ra 
dhcp-range=vlan150,2001:DEAD:BEEF:DDDD::,ra-stateless,ra-names,64,24h 
dhcp-range=vlan200,2001:DEAD:BEEF:EEEE::,ra-stateless,ra-names,64,48h 
dhcp-range=vlan300,2001:DEAD:BEEF:AAAA::,ra-stateless,ra-names,64,48h 

### logging 
## specify syslog facility (- to disable) 
log-facility=- 
## verbose logging 
#log-dhcp 
#log-queries