[Dnsmasq-discuss] Test release with tag-if support.

[Ignacio.Bravo at belden.com]

 Hello Simon, I tried the following on 2.53-test8:

tag-if= set:fixedport, tag:puerto3, tag:switch1
dhcp-range=net:switch1,net:puerto3,10.10.35.2,10.10.35.5,255.255.255.0
#dhcp-option=net:switch1,net:puerto3,54,10.10.35.251
dhcp-circuitid=puerto3,b9:06:00:00:01:01:01:03
dhcp-remoteid=switch1,00:06:00:80:63:60:e1:64


dhcp-range=net:#fixedport,10.10.35.40,10.10.35.50,255.255.255.0
dhcp-option=net:#fixedport,option:router,10.10.35.100
dhcp-option=net:#fixedport,option:dns-server,8.8.8.8
#dhcp-option=net:#fixedport,54,10.10.35.251

Tag-if works ok in this example. I get 10.10.35.5 when at port3 and 
10.10.35.41 at any other B^)

Now, if I get 10.10.35.5 at port3 and then connect my pc to port1, my IP 
is still .5 (no renewal yet). If I try a ipconfig/renew (force the unicast 
renewal), I get an ACK for 10.10.35.5 instead of a proposal 10.10.35.41

I tried the dhcp-server-identifier:
dhcp-option=net:switch1,net:puerto3,54,10.10.35.251
dhcp-option=net:#fixedport,54,10.10.35.251
But no success (request is directly sent to the server ip instead of 
relay's)
Maybe these two lines are not ok or I should activate any other option 
instead
Thanks
Ignacio

DISCLAIMER:

Privileged and/or Confidential information may be contained in this
message. If you are not the addressee of this message, you may not
copy, use or deliver this message to anyone. In such event, you
should destroy the message and kindly notify the sender by reply
e-mail. It is understood that opinions or conclusions that do not
relate to the official business of the company are neither given
nor endorsed by the company.

Thank You.