[Dnsmasq-discuss] replace dnsmaq by radvd

Simon Kelley simon at thekelleys.org.uk
Thu May 23 10:07:26 BST 2013


On 23/05/13 09:41, Moritz Warning wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 05/23/2013 08:57 AM, Kevin Darbyshire-Bryant wrote:
>> On 22/05/2013 22:43, Moritz Warning wrote:
>>> Sorry for the delay - life is busy. :)
>>>
>>> Actually the ip address of br-private is of type "prefix"::1
>>>
>>> root at OpenWrt:~# ip -6 address show dev br-private
>>> 8: br-private:<BROADCAST,MULTICAST,UP,LOWER_UP>  mtu 1500
>>>      inet6 fdef:17a0:ffb1:1::1/64 scope global
>>>         valid_lft forever preferred_lft forever
>>>      inet6 fe80::f887:99ff:fea9:34af/64 scope link
>>>         valid_lft forever preferred_lft forever
>>>
>>> Here is the content of my dnsmasq.conf:
>>> enable-ra
>>> dhcp-range=fdef:17a0:ffb1:1::1,constructor:br-private,slaac,64,infinite
>>> dhcp-authoritative
>>> domain-needed
>>> localise-queries
>>> read-ethers
>>> bogus-priv
>>> expand-hosts
>>> dhcp-leasefile=/tmp/dhcp.leases
>>> resolv-file=/tmp/resolv.conf.auto
>>>
>>>
>>> dhcp-range=private,192.168.133.100,192.168.133.249,255.255.255.0,12h
>>> dhcp-option=private,3,192.168.133.1
>>> dhcp-range=public,10.29.0.1,10.29.254.254,255.255.0.0,2h
>>> dhcp-option=public,3,10.29.131.187
>>> no-dhcp-interface=eth0.2
>>>
>>>
>>> The problem is that my computer (attached to br-private) does only
>>> get an ipv4 address and ipv6 link local (fe80::..).
>>>
>>> Any ideas where I should look for errors?
>>> dnsmasq is version 2.62 (IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP
>>> no-DHCPv6 no-Lua TFTP no-conntrack).
>>>
>>> regards,
>>> mwarning
>>
>> Constructor option is 2.66&  later.
>>
>>
>>
>>
>>
>> _______________________________________________
>> Dnsmasq-discuss mailing list
>> Dnsmasq-discuss at lists.thekelleys.org.uk
>> http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss
>
> What a pity. OpenWrt Attitude Adjustment seems to be stuck at 2.62.
>
I don't know the details of OPenWrt development, but there definitely 
exists versions with later dnsmasq releases. The constructor: syntax was 
added at the suggestion of OpenWrt devs.

Cheers,

Simon



More information about the Dnsmasq-discuss mailing list